Sterilization Bags are used in pharmaceutical and medical industries where FDA Class 100 clean sterilization/packaging is required. The bags handle virtually any materials required for sterilization up to 123 C (128 peak) for extended periods. The Breather Sheet serves as lidding for the majority of containers.
Sterilization Bags are fabricated from a slitted 3 mil polypropylene sheet, with a heat-sealed Tyvek® breather strip which is then sealed to a second polypropylene sheet to form a bag or tube.
Polypropylene is an excellent all-purpose Level I packaging film that provides good abrasion resistance and superior film seal strength. Tyvek 1059B is a pharmaceutical grade material that provides an excellent barrier to dust and bacteria with thermal stability for dry heat or autoclave sterilization.
Product Attributes -Sterilizable by steam, ethylene oxide and dry heat -Bags and lids are cleaned and packaged in a Class 10/100 clean room
-Clean Room Products Level I. (Other government, industry and company specs available upon request.)
-Excellent alternative to cumbersome stainless steel autoclave canisters
-Bags are less expensive, and easier to handle and store
-Transparent, for convenient visual inspection -Exceptional pliability enables operators to separate "coagulated" products without opening the pouch -Bags and sheets in a variety of standard and custom sizes -Custom thicknesses available -Breather dimensions: 4" wide. -Breather location: Center of bag or sheet. -Cleanliness level: Clean Room Products Level I. -Final packaging: Triple barrier packaged with inner nylon and two polyethylene bags.
-Film is milky translucent and is certified to Clean Room Products Level II or III. -Options of alternate breather widths available, 6" and 8" standard and alternate breather strip location.
Options Rubber modified polyethylene, 4 mil, for increased seal strength at lower autoclave extremes (<126°c film="" is="" milky="" translucent="" span="">